|
MSDS
Contact ThermoCon:
12315
Robin Blvd Houston, TX 77045
Toll
Free: (800)979-4914
|
ThermoCon has been used for over three decades in hospitals, churches, indoor swimming pools,
underground parking facilities, and other projects. ThermoCon
is an exposed-finish product available in a wide array of standard colors , consisting of specially
milled cellulose fibers treated with fire retardant chemicals, high
performance adhesive and proven application methods.
ThermoCon provides a monolithic coating that is tough with an attractive carpet-like texture
that follows the contour of the architect’s design to provide exceptional noise reduction,
condensation control, and outstanding thermal control in one application. ThermoCon out
performs prefabricated insulation products because it is spray applied, eliminating voids
and compression areas that reduce thermal efficiency.
ThermoCon provides superior thermal resistance by
creating a monolithic seal with the use of hollow interlaced fibers
sprayed in place with no seams or voids. Our seamless application provides
an R-Value of 3.7 per inch and is a significant barrier to air
infiltration, convection and radiation in both hot and cold environments,
thereby reducing heating and cooling costs.
ThermoCon has the ability to absorb sound instead of
reflecting it thereby reducing the reverberation time. A one-inch
application of ThermoCon will absorb up to 75% of the sound caused by the
reverberations from hard surfaces such as walls, ceilings and floors.
ThermoCon is effective over a broad range of frequencies at varied
thickness. Acoustical consultants and architects know that unwanted noise
affects comfort, concentration and behavior. Buildings insulated with
ThermoCon are quieter, creating a more relaxed atmosphere for the
occupants.
Typical applications are sprayed on wood, steel, concrete, gypsum board, brick, glass, plaster, spayed
and rigid board polyurethane foam and other foam insulation. ThermoCon Sprayed Thermal & Acoustical
Insulation has been tested by a NAVLAP accredited laboratory that is code accepted and found to be
suitable as an approved thermal barrier over sprayed polyurethane foam, rigid polyurethane foam and
other plastic insulation materials.
ThermoCon is available in basic white and a Spectrum of Colors. Specially
matched custom colors are available. Call today for a sample.
- Schools
- Gymnasiums
- Auditoriums
- Churches
- Hotels
- Libraries
- Detention Centers
- Parking Garages
- Office Buildings
- Theaters
|
- Convention Centers
- Television Studios
- Restaurants
- Apartment Buildings
- Shopping Malls
- Warehouses
- Airports
- Condominiums
|
- Climate Controlled Storage Facilities
- Pre-Engineered Metal Buildings for Various Uses
|
|
click for larger image
|